Demonstrator kits
 |
| All kits contain working units. |
CamSemi’s demonstrator kits contain everything you need to get started on designing low cost SMPS solutions including: a prototype power supply plus spare bipolar transistors, transformers parts, blank PCBs and CamSemi controller ICs.
Demonstrator kits are being supplied free of charge but are currently available only to qualified applicants.
Click here to request a kit or check out how the energy efficiency and no-load power consumptions of our reference designs compare versus ENERGY STAR 2.0 for external power supplies and related standards.
* CamSemi is registered under WEEE regulations as a supplier of
assembled circuit boards for evaluation of our components. See
the quality/environment page for more information.
** please note
the efficiency figures quoted below are an average at four load points.
| Design reference boards* | ||||||
| Application | Part no | Input | Output | Power | Efficiency** &no load | PDF links |
|
Cordless phones DK-1888 | C2471LX2 | 230 V | 9 V | 3 W |
80% 150 mW | Datasheet Design guide Design report |
|
Cordless phones DK-1887 | C2471LX2 | 110 V | 9 V | 6 W |
82% 160 mW | Design report |
|
Mini adapter DK-1881 | C2472PX2 | 110 V | 9 V | 9 W |
85% 80 mW | Datasheet Design guide Design report |
|
Modem adapter DK-1885 | C2472PX2 | 120 V | 12 V | 12 W |
85% 130 mW | Datasheet Design guide Design report |
|
Modem adapter DK-1886 | C2472PX2 | 230 V | 12 V | 12 W |
86% 211 mW | Datasheet Design guide Design report |
|
Audio systems DK-1884 | C2474PW1 | 230 V | 12 V | 15-30 W |
88% 265 mW | Datasheet Design guide Design report |
